Support

Pages

Thursday, 21 September 2017

QMobile S200 Flash File Free Download

QMobile S200 is a feature phone form QMobile this phone is MTK based that's why if you want to flash that phone you need any chines flashing box like CM2 MRK Tool or Volcano box.


On this post we share QMobile S200 official Flash file we test this ROM on many phones it,s work well for any flashing tool or flashing device so download and if you like that post please share it.

Note!


Before flash you,r phone tack full backup all of you,r data after flashing all of you,r will be lose or if you have any flashing box then backup phone,s flash file in case if phone did not boot then you can write that file.

QMobile S200




DOWNLOAD AND AND UNZIP  ON YOU PC.
AND FLASH WITH VOLCANO OR MIRACLE,GPG DRAGON BOX OR CM2SPD TOOL OR WHICH FLASHING TOOL YOU HAVE SELECTING BOOT S7 FLASH WITH THIS FILE YOU SET WILL BE OK.
SOME TIME SOME MOBILES LCD MAKE PROBLEM THAT SWAY IT IS GOOD FOR YOU IF YOU BACKUP YOUR SET FLASH FILE FIRST THEN FLASH.


Tip


  • Before starte official update of uoyr phone you must have to >
  • full backup all of your data like SMS,Contaccts,pics and videos afrter updating all of your data will be lose.
  • Make sure that your phone is charge up to 50%
  • MTK USB drivers must be install on your PC.
  • Any Chines Flashing Box you must have to flash this phone like CM2 or Volcano box.
  • Correct firmware of your model must be download.



Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 77 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 0CFF4C316AF45A7D0A1828A4819AE76B
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 , [MXIC] MX25L3291FWJI_09
[0] : FLASH_DIE : 00C2 0020 0016 0000 
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ... 

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : FARSIGHTED61D_11C_PCB01_gprs_MT6261_S00.QMOBILE_POWER_9_V6.bin
FileVersion : QMobile_Power_9_V6
Saved to : C:\InfinityBox\CM2MTK\Read_out\FARSIGHTED61D_11C_PCB01_gprs_MT6261_S200.QMOBILE_S200_V6.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

Warning!

That firmware file is only for only for QMobile S200 don't try to install that firmware on other models of QMobile other devices that can be destroy your phone.

Download 
Share:

0 comments:

Post a Comment

CLOSE

Like Us On Facebook

Unordered List

Blogger Tips And Tricks